首页 » 技术分享 » H3C交换机查询光功率

H3C交换机查询光功率

 

1、display transceiver(收发器,指光模块) interface

<M9010>dis transceiver interface 
M-GigabitEthernet1/0/0/0 transceiver information:
The operation is not supported.                    ——不支持此项功能
Ten-GigabitEthernet1/0/0/1 transceiver information:
The transceiver is absent.                         ——未放置模块
Ten-GigabitEthernet1/0/0/2 transceiver information:——模块信息
  Transceiver Type              : 1000_BASE_SX_SFP 
  Connector Type                : LC
  Wavelength(nm)                : 850
  Transfer Distance(m)          : 550(OM2),270(OM1)
  Digital Diagnostic Monitoring : YES
  Vendor Name                   : CISCO
Ten-GigabitEthernet1/0/0/4 transceiver information:
  Transceiver Type              : 1000_BASE_SX_SFP
  Connector Type                : LC
  Wavelength(nm)                : 850
  Transfer Distance(m)          : 500(OM2),300(OM1)
  Digital Diagnostic Monitoring : YES
  Vendor Name                   : FINISAR CORP.
Ten-GigabitEthernet1/0/0/5 transceiver information:
  Transceiver Type              : 10G_BASE_SR_SFP
  Connector Type                : LC
  Wavelength(nm)                : 850
  Transfer Distance(m)          : 80(OM2),20(OM1),300(OM3)
  Digital Diagnostic Monitoring : YES
  Vendor Name                   : H3C

2、display transceiver diagnosis interface

<M9010n>dis transceiver diagnosis interface
M-GigabitEthernet1/0/0/0 transceiver diagnostic information:
The operation is not supported.
Ten-GigabitEthernet1/0/0/1 transceiver diagnostic information:
The transceiver is absent.
Ten-GigabitEthernet1/0/0/2 transceiver diagnostic information:
  Current diagnostic parameters:
    Temp.(?? Voltage(V)  Bias(mA)  RX power(dBm)  TX power(dBm)  
    22         3.39        3.98      -6.73          -5.65          
  Alarm thresholds:
          Temp.(?? Voltage(V)  Bias(mA)  RX power(dBm)  TX power(dBm)  
    High  90         3.63        12.75     3.00           0.00           
    Low   -10        2.97        2.00      -21.02         -13.50         
Ten-GigabitEthernet1/0/0/4 transceiver diagnostic information:

Reading information from the transceiver failed.

3、display transceiver manuinfo interface

<M9010>display transceiver manuinfo interface 
M-GigabitEthernet1/0/0/0 transceiver manufacture information:
The operation is not supported.
Ten-GigabitEthernet1/0/0/1 transceiver manufacture information:
The transceiver is absent.
Ten-GigabitEthernet1/0/0/2 transceiver manufacture information:
The transceiver does not support this function.
Ten-GigabitEthernet1/0/0/5 transceiver manufacture information:
  Manu. Serial Number : 210231A1RPX149001856
  Manufacturing Date  : 2014-09-10
  Vendor Name         : H3C

4、援引网上博客《各厂家网络设备查看端口收发光功率-命令汇总》
https://blog.csdn.net/ligang636/article/details/21226905
博猪很懒,半年都没写几篇像样的技术文章,今天抽风,汇总一下不同厂家设备的端口收发光命令吧,工程上经常用到,也经常容易忘记,备忘。

本文记录的设备型号有:cisco CRS、7609、Nexus7K、华为NE5000E、9312、8512、H3C 12508、中兴8905、Juniper EX8208、上海贝尔(阿尔卡特)OS10K、SR7750。

型号:思科CRS-1 系统版本:IOS XR , Version 4.0.4

CRS-1#show controllers SONET 0/0/1/0

<…>

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0828 mW, -10.8 dBm
  Tx power = 1.0288 mW, 0.1 dBm
  Tx laser current bias = 68.3 mA

!<---------POS口

CRS-1#show hw-module subslot 0/10/0 status pluggable-optics 0

SPA 0/10/0 device pluggable-optics 0/0 info:
int Tengige/10/0/0: 
        State: Enabled
        Environmental Information - raw values
                Temperature: 8602
                Tx voltage: 0 in units of 100uVolt
                Tx bias: 63000 uA
                Tx power: 0 dBm (10180 in units of 0.1 uW)
                Rx power: -9 dBm (1126 in units of 0.1 uW)
                (AUX1) +3.3V Supply Voltage: 32324

!<---------GE口

型号:思科7609

7609#show interfaces te1/1 transceiver

                                         Optical   Optical
            Temperature  Voltage  Current   Tx Power  Rx Power
Port        (Celsius)    (Volts)  (mA)      (dBm)     (dBm)
----------  -----------  -------  --------  --------  --------
Te1/1         40.3        N/A      83.6 --    1.9     -14.3  

型号:思科Nexus7010

N7K#show interface e3/1 transceiver details
    SFP Detail Diagnostics Information (internal calibration)

          Current              Alarms                  Warnings
          Measurement     High        Low         High          Low

Temperature 24.08 C 90.00 C -10.00 C 85.00 C -5.00 C
Voltage 3.27 V 3.59 V 3.00 V 3.50 V 3.09 V
Current 6.79 mA 15.00 mA 1.00 mA 12.00 mA 2.00 mA
Tx Power 15.03 dBm 20.00 dBm 6.50 dBm 17.00 dBm 10.49 dBm
Rx Power 12.35 dBm 23.00 dBm -1.02 dBm 20.00 dBm 3.01 dBm
型号:华为NE5000E

NE5000E#display interface pos 1/6/0/0

<…>
Rx Optical Power: -3.62dBm, Tx Optical Power: -2.25dBm
Physical layer is Packet Over SDH
Scramble enabled, clock master, CRC-32, loopback: none
Flag J0 "NetEngine       "
Flag J1 "NetEngine       "
Flag C2 22(0x16)
    SDH alarm:
        section layer:  none
        line    layer:  none
        path    layer:  none
    SDH error:
        section layer:  B1 0
        line    layer:  B2 0  REI 0       
        path    layer:  B3 0  REI 0

<…>

!<---------POS口

NE5000E#display interface gi1/8/0/1

<..>

WaveLength: 1310nm, Transmission Distance: 10km
Rx Optical Power: -5.06dBm, Tx Optical Power: -2.01dBm
Loopback:none, LAN full-duplex mode, Pause Flowcontrol:Receive Enable and Send Enable

<..>

!<-------GE口

型号:华为9312

S9312#display transceiver interface XGigabitEthernet 1/1/0/0 verbose

<…>
-------------------------------------------------------------

    Diagnostic information:
      Temperature(??C)                      :35
      Voltage(V)                            :3.31
      Bias Current(mA)                      :6.52
      Bias High Threshold(mA)               :10.00
      Bias Low  Threshold(mA)               :2.60
      Current Rx Power(dBM)                 :-3.12
      Default Rx Power High Threshold(dBM)  :1.50
      Default Rx Power Low  Threshold(dBM)  :-14.00
      Current Tx Power(dBM)                 :-2.10
      Default Tx Power High Threshold(dBM)  :-1.00
      Default Tx Power Low  Threshold(dBM)  :-8.00
      User Set Rx Power High Threshold(dBM) :1.50
      User Set Rx Power Low Threshold(dBM)  :-14.00
      User Set Tx Power High Threshold(dBM) :-1.00
      User Set Tx Power Low Threshold(dBM)  :-8.00

-------------------------------------------------------------

型号:华为8512

S8512#display fiber-module GigabitEthernet 0/1/1

GigabitEthernet0/1/1 transceiver information:
  Transceiver Type                   : 10G_LR_SM_LC
  Connector Type                     : LC
  Wavelength(nm)                     : 1310
  Transfer Distance                  : 10km(SMF)
  Digital Diagnostic Monitoring      : YES
  Vendor Name                        : FINISAR CORP.   
  TX Power                           : -2.0dBM
  RX Power                           : -2.5dBM

型号:H3C 12508

H3C12508#display transceiver diagnosis interface te3/0/1

Ten-GigabitEthernet3/0/1 transceiver diagnostic information:
  Current diagnostic parameters:
    Temp.(°C) Voltage(V)  Bias(mA)  RX power(dBM)  TX power(dBM)
    30         3.36        30.10     -1.45          -2.01

型号:Juniper EX8208

EX8208>show interfaces diagnostics optics xe-0/0/1

Physical interface: xe-0/0/1
    Laser bias current                        :  37.996 mA
    Laser output power                        :  0.6900 mW / -1.61 dBm
    Module temperature                        :  30 degrees C / 86 degrees F
    Module voltage                            :  3.2990 V
    Receiver signal average optical power     :  0.5150 mW / -2.88 dBm
<…>

型号:中兴8905 系统版本:V3.00.02.B10

ZXR10(config)#interface xgei-0/1/0/2

ZXR10(config-if)#optical-inform monitor enable

ZXR10#show optical-inform brief interface xgei-0/1/0/2

If device is externally calibrated, only calibrated values are printed.
-Inf: not applicable, Tx: transmit, Rx: receive.
                                                        Optical   Optical
Interface     Temperature  Voltage  Voltage    Current   Tx Power  Rx Power
Name          (Celsius)  (3.3 Volts)(5 Volts)  (mA)      (dBm)     (dBm)
--------------------------------------------------------------------------------
xgei-0/1/0/2   33.20       3.27      N/A       54.01     1.87      -10.72

型号:上海贝尔Omniswitch 10K

OS10K>interfaces ddm enable

OS10K>show interfaces port 3/1 ddm

  Slot/     Thres-    Temp       Voltage      Tx Bias      Output       Input
  Port      hold       (C)         (V)          (mA)        (dBm)       (dBm)
----------+--------+----------+------------+------------+------------+------------
  3/1       Actual    21.0        3.258        4.136       -5.969       -6.719    
              A-High   100.0        3.600       40.000        1.000        3.486    
              W-High    90.0        3.500       30.000        0.000        2.486    
              W-Low      0.0        3.100        1.000       -9.500      -12.518    
              A-Low     -5.0        3.000        0.500      -10.501      -13.516 

型号:阿尔卡特(贝尔)SR 7750

SR7750#show port 1/1/1 detail | match DDM post-lines 10

Last Cleared Time  : 10/25/2012 15:54:54        DDM Events       : Enabled
Configured Mode    : network                    Encap Type       : null
Dot1Q Ethertype    : 0x8100                     QinQ Ethertype   : 0x8100
PBB Ethertype      : 0x88e7                     
Ing. Pool % Rate   : 100                        Egr. Pool % Rate : 100
Ing. Pool Policy   : n/a
Egr. Pool Policy   : n/a
Net. Egr. Queue Pol: default                    
Egr. Sched. Pol    : n/a
Auto-negotiate     : N/A                        MDI/MDX          : N/A

Transceiver Digital Diagnostic Monitoring (DDM)
===============================================================================

                                  Value High Alarm  High Warn   Low Warn  Low Alarm
    -------------------------------------------------------------------------------
    Temperature (C)               +28.8     +83.0      +80.0      -10.0     -13.0 
    Tx Bias Current (mA)           37.9      80.0       75.0       20.0      15.0 
    Tx Output Power (dBm)         -1.97      1.50       1.00      -6.00     -7.00 
    Rx Optical Power (avg dBm)    -3.11      2.50       2.00     -18.01    -20.00 
    Aux1: 3.3 Voltage (V)          3.29      3.63       3.50       3.10      3.00 

==================================================================

=============
版权声明:本文为博主原创文章,未经博主允许不得转载。www.sexygirls.cc https://blog.csdn.net/ligang636/article/details/21226905

转载自原文链接, 如需删除请联系管理员。

原文链接:H3C交换机查询光功率,转载请注明来源!

0